Industrial Steel Chimneys 8–245 m — Designed, Fabricated & Shipped from Our Own Workshop

A steel structure fabrication company in Jinan, Shandong. Structural design, plate rolling, welding and NDT, surface protection and trial assembly all happen under one roof — then we handle the export documentation to your port. Designed to GB/T 50051-2021 and GB 50135-2019, welded to AWS D1.1.

ISO 9001:2015AWS D1.1 welding100% UT/RT on butt welds350 km to Qingdao Port
Our Specialty

Industrial Steel Chimneys, Built to Your Flue Gas Spec

Height 8–245 m · Shell Ø 0.5–4.5 m · Plate 6–40 mm. Self-supporting, guyed, multi-flue and framed designs, matched to the operating condition of your plant.

Tower-supported chimney for an electrostatic precipitator, Shanxi chemical plant

Industrial Steel Chimneys

Single-flue, guyed and multi-flue chimneys for power plants, boiler houses and process plants. Designed to GB/T 50051-2021 and GB 50135-2019, fabricated to AWS D1.1.

8–245 mØ 0.5–4.5 m6–40 mm
View chimneys →
Power plant steel chimney

Power Plant Steel Chimneys

Tall stacks for thermal, biomass and waste-to-energy plants. Wet FGD and desulphurised gas conditions handled with dedicated liner systems.

FGD readyTall stacksLiner options
View details →
Framed tower-supported steel chimney on site

ESP Tower & Steel-Platform Chimneys

Chimneys integrated with electrostatic precipitators and scrubber towers, and chimneys mounted on steel platforms, with the supporting steel frame and access platforms.

IntegratedSteel platformsAccess
View details →
8–245 mHeight range
0.5–4.5 mDiameter range
6–40 mmPlate thickness
Q355DUp to 316L / 2205
Why Texin

Design, Fabrication and Documents in One Pair of Hands

Many suppliers of Chinese steel chimneys are trading companies. We hold the workshop, the welders and the design department — so the specification you agree is the one that gets built.

📐

In-House Design

Structural calculation and detail drawings to GB/T 50051-2021 and GB 50135-2019 — including wind and seismic loading for your site.

⚙️

Own Fabrication

Cutting, rolling, fit-up and welding under one roof. No subcontracted rolling, no third-party welding on the shell.

🔍

100% Component Inspection

UT, RT, MT and PT on every batch, with third-party inspection by SGS, BV or TÜV when your contract requires it.

📦

Export-Ready Packing

Segmentation planned against your road limits and crane capacity, sea-worthy packing, full export documentation from Qingdao.

Also fabricating steel structures

Beyond chimneys we build auxiliary steelwork — platforms, ladders, support frames, ducts and general fabrication to drawing. Ask for a quote on your steel package.

Send a drawing
Capability

What We Can Build — Stated as Limits, Not Slogans

We are building our export record, so we will not show you reference projects we cannot prove. What we show is the workshop: equipment capacity, the tolerances we hold and the tests we run before a course leaves the floor.

Steel chimney fabrication workshop with overhead cranes

Workshop Capacity

12 000 m²2 × 32 t cranes1 200 t / month

Plate to 40 mm, shell to Ø 8 m, trial assembly to 40 m. These are the machine limits.

Ultrasonic testing of a chimney shell weld

Tolerances & Testing

≤ 2 mm roundnessH/1000 plumbUT / RT / MT / PT

Every value is written into the ITP for your order and recorded as it is measured.

Self-supporting industrial steel chimney

Types We Deliver

8–245 mSelf-supportingGuyed / tower

Single-flue, multi-flue, guyed and braced-tower chimneys, with the lining matched to your flue gas.

See the full capability page

How We Work

From Drawing to Delivered Stack

📐

Design & Engineering

Structural calculation and detail drawings to GB/T 50051-2021 and GB 50135-2019.

⚙️

Fabrication & Welding

Rolling, fit-up and welding in-house, welded to AWS D1.1.

🔍

NDT & Quality Control

UT, RT, MT and PT, plus third-party inspection on request.

📦

Surface Treatment & Packing

Shot blasting, coating to ISO 12944, and sea-worthy segment packing.

See the full process

Next Step

Send Your Chimney Spec —
Response Within 24 Hours

Our engineers review every enquiry personally. Attach a drawing or just describe the plant — we will come back with a technical proposal and a priced offer.

  • Drawings or applicable standard
  • Quantity / number of stacks
  • Destination port
  • Flue gas condition
  • Required delivery date
  • Payment terms